Our conventional Evaporators, the semi-kestners
as well as the falling film evaporators incorporate many unique
design feature which makes the system readily acceptable in
the Sugar industry.
Maximum steam economy due to special vapour
Increased capacity, by about 25% on account of higher heat
transfer coefficient due to high velocity of juice in the
Reduced inversion losses due to less retention time of juice
at high temp.
Energy saving due to no re-circulation pump in S.K. or conventional
Less Space requirement.
Less scaling due to high velocities.
Easy to clean.
No entrainment of juice with vapours due to highly efficient
'save alls' & various baffler.
Higher vapour Pressure available for pan boiling on vapours.
Unique equitable wetting of tubes through innovative design
of juice distributor nozzle for each tube for falling film
One of the power consuming station in the
sugar plant is injection system for pan and evaporators and
spray pond. A good system reduces the power required and also
uses minimum water for vacuum generation, thereby reducing
further load on spray system.
The Unique SS air extractor system incorporated with all above
features and guarantees at least 40% reduction in the power
requirement compared to conventional system.
With the use of air-extractor, the load of water going to
spray pond is reduce by about 50%, the injection water pump
load is reduce by 40% and therefore reduction in the power